The Combat Vehicle Crew helmets, which are made in accordance with MIL-STD-810, are available in several different configurations for specific mission types.
Typical applications for the helmet system are tanks, troop carriers, and Stryker, LAV and Avenger vehicles.
Excellent speech intelligibility
Full-spectrum noise reduction
Flexible boom microphone
a. Outer Shell: An outer ballistic helmet shell is available in one size: Medium, and multiple colors: Black, Green, Olive Drab, Desert Tan, Gray or Foliage Green. Selection of helmet protection is available -- fiberglass (bump only), ballistic protection V50 1400 fps and ballistic protection V50 2150 fps per MIL Standard 662, 17 grain fragmentation simulation. An outer shell is optional.
b. Inner Liner: An inner helmet liner attaches to both the outer helmet shell and communications system. The inner liner is available in two sizes: Small and Medium/Large (fits 5th to 95th percentile), and includes either an impact foam that is skived for ventilation or a high-moisture/high-humidity resistant ventilated foam pads. The liner is made of fire retardant material.
c. COMMUNICATIONS SYSTEM: The DH-132S/DH-132AS is equipped with an MK-1697/G communications kit (or other optional kits) which includes a microphone (dynamic or noise canceling electret), two earphones (one installed in each earcup), a cordset with a lower AP-107XL plug, and a radio-intercom switch.
- The middle connector : NEXUS connector AJ-107XL and AP-107XL
- End connector : U-229/U 5 pin connector x 2 ea