Power-Time Military Ballistic Helmet Hearing Protection
The Combat Vehicle Crew helmets, which are made in accordance with MIL-STD-810, are available in several different configurations for specific mission types.
Typical applications for the helmet system are military tanks, troop carriers, and Stryker, LAV and Avenger vehicles.
Excellent speech intelligibility
Full-spectrum noise reduction
Flexible boom microphone
a. Outer Shell: An outer ballistic helmet shell is available in one size: Medium, and multiple colors: Black, Green, Olive Drab, Desert Tan, Gray or Foliage Green. Selection of helmet protection is available -- fiberglass (bump only), ballistic protection V50 1400 fps and ballistic protection V50 2150 fps per MIL Standard 662, 17 grain fragmentation simulation. An outer shell is optional.
b. Inner Liner: An inner helmet liner attaches to both the outer helmet shell and communications system. The inner liner is available in two sizes: Small and Medium/Large (fits 5th to 95th percentile), and includes either an impact foam that is skived for ventilation or a high-moisture/high-humidity resistant ventilated foam pads. The liner is made of fire retardant material.
c. COMMUNICATIONS SYSTEM: The DH-132S/DH-132AS is equipped with an MK-1697/G communications kit (or other optional kits) which includes a microphone (dynamic or noise canceling electret), two earphones (one installed in each earcup), a cordset with a lower AP-107XL plug, and a radio-intercom switch.
- The middle connector : NEXUS connector AJ-107XL and AP-107XL
- End connector : U-229/U 5 pin connector x 2 ea